Name: only sale 2.50 usd for Unistrut P1271S - Beam Clamp
SKU: US-7191022371021
Price: 2.50 USD
Availability: InStock

Unistrut P1271S – Beam Clamp Online now

Finish

Electrogalvanized

Perma-Green® III

Hot-Dipped Galvanized

Stainless Steel

Order Size

Single Piece

Box of 25 Pieces

Unistrut P1271S – Beam Clamp

The Unistrut P1271S Parallel Beam Clamp is designed to be used when running the channel in the same direction as the beam.

Features:

Vertical Design Load: 500 lbs per clamp. Must use in pairs.
Use with P1000 and P1100 channels
Requires P1010 channel nut and bolt
This series is available in Electrogalvanized (EG), Unistrut Defender (DF), Hot-Dip Galvanized (HG), and Stainless Steel (SS).

Brands Available:

Unistrut

Design Loads & Installation

Design Load = 500 lbs (2.22 kN) each

Notes:

Design loads only apply to Unistrut brand products. Look for “UNISTRUT” on the part.
Use in pairs only.
Safety factor = 2.5 based on ultimate strength of connection.
Requires a P1010 Channel Nut and ¹/₂” bolt.
Set Screw Installation Torque: 125 in-lbs (14 N-m)

General Specifications

Standard Dimensions (Unless Shown Otherwise on Drawing):

Hole Diameter: ⁹/₁₆” (14mm)
Hole Spacing (From End): ¹³/₁₆” (21mm)
Hole Spacing (On-Center): 1 ⁷/₈” (48mm)
Width: 1 ⁵/₈” (41mm)
Thickness:

¹/₄” (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
0.220″ (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Materials & Finishes

Materials & Finishes – Standard:

Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
Unistrut Defender (DF): Conforms to ASTM A1059
Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
Perma-Green (GR): Conforms to commercial standards for powder coating
Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1 or SC3
Plain (PL): No finish

Materials & Finishes – Special Metals:

Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or A276, Type 304 *
Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or A276, Type 316 *
Aluminum (AL): Conforms to ASTM B209, Type 1100F or 5052-H32 *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

P1271S CUT SHEET PDF DOWNLOAD

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.